Mini Drill Chuck 1/8" Shank For Micro Drill Bits Review
Mini Drill Chuck 1/8" Shank For Micro Drill Bits Feature
- Capacity: 0.010-.060" or #60-#80 drill bits
- Shank: 1/8"
- Black Oxide Finish
- Overall Length: 1.3"
Mini Drill Chuck 1/8" Shank For Micro Drill Bits Review
DEWALT DW1369 29-Piece Titanium Pilot-Point Drill Bit Set Review
Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8" Diameter x 2" Depth Capacity Review
The Jancy Holemaker II 120V, 11.5 amp portable magnetic-base drill press has a powerful magnet and compact size making it a good choice for fabricating in confined spaces, a 1-3/8” maximum cutting diameter, a 2” maximum cutting depth, an external coolant bottle that delivers coolant through the arbor, and an electromagnet with a dead lift of 2350 lb. and a drill point breakaway of 1095 lb. on 1” thick steel when drilling holes 1-1/16” diameter and larger. Safety features prevent the drill from turning on if the magnetic field is not strong enough to hold the drill, turn on a warning light when the magnetic field drops to an unsafe level, and turn the motor off if the press breaks free from the surface to which it is attached. A safety strap is designed to prevent the drill from falling when power to the magnet is interrupted, and a chip guard controls chips. For customization, a 3-spoke handle can be mounted on either side of the press. The drill press accommodates annular cutters with a 3/4" shank, and can be converted to hold a 1/2” capacity drill chuck (all sold separately).
The Jancy Holemaker II 120V portable magnetic-base drill has a 1.75 horsepower (HP) 1380 watt single-phase motor. The drill is 14 x 7-3/4 x 13-3/4 inches (H x W x D) and it weighs 30 lb. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)
Magnetic drill presses are used in steel fabrication industries to drill holes in steel where it is necessary to move the drill to the workpiece, such as ship and bridge building. They are portable and have a magnetic base that secures the drill to the steel workpiece, allowing the drill to be mounted vertically, from either the top or bottom of the workpiece, or horizontally on the side of the workpiece. They are usually used with annular cutters, though some can be converted to hold a chuck with drill bits or with threading taps. Magnetic drill presses are given two numbers that signify the strength of the magnetic field. Magnet deadlift signifies the amount of force it takes to lift the drill off 1” thick steel when the magnet is turned on. Drill point breakaway is the amount of force it takes the drill bit to push the drill off 1” thick steel when the drill is in operation. Generally, higher numbers indicate that the press can exert more force on the workpiece.
Jancy Engineering manufactures Slugger portable magnetic drills and annular cutters, as well as metal working equipment for the fabrication trade. The company, founded in 1957 and headquartered in Davenport, IA, makes tools that meet American National Standards Institute (ANSI) standards.
What’s in the Box?
Makita DA3010F 4 Amp 3/8-Inch Right Angle Drill with LED Light Review
Bosch CC60486 6" Magnetic Drill Bit Tip Holder Review
DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw Review
Whether building wood decks or dormers, bookcases or kitchen cabinets, the professional-duty DEWALT DC390B 18-volt, 6-1/2-inch cordless circular saw delivers cordless convenience without sacrificing power or performance. An 18-volt battery (not included) drives the saw's 6-1/2-inch, thin-kerf blade at 3,700 RPM, an optimum speed for crosscutting and ripping construction lumber, softwood, hardwood, plywood, particleboard, oriented-strand board, and virtually any other sheet.
|
With depth-of-cut capacities of 2-1/4-inch at 90-degrees and 1-5/8-inch at 45-degree (bevel), the DC390B can slice through all 2-by dimensional lumber. The 6-1/2-inch carbide tipped blade gives you 2x cutting capacity at 90 and 45 degrees, and the 0-50-dgree bevel capacity provides additional capacity for a multitude of applications.
A high strength magnesium shoe and upper guard provides increased durability, while a fan-cooled motor with replaceable brushes provides maximum power and durability. It's complemented by a vibration-dampening rubber-grip handle for comfortable handling on big jobs. This circular saw weighs 6.3 pounds.
This DEWALT cordless tool does not come with a battery or charger. It's compatible with the DC9096 18-volt XRP battery pack and DW9117 15-minute charger.
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
One DEWALT DC390B 18-volt 6-1/2-inch cordless circular saw, one carbide tipped blade, one blade wrench, and operating instructions (batteries and charger sold separately).
0-50 degree bevel capacity provides additional capacity for a multitude of applications (view larger). |
SE 10PC 1/8" H S S Drills Bits, Diamond Coated. Review
Bare-Tool Makita BDF451Z 18-Volt LXT Lithium-Ion Driver/Drill (Tool Only, No Battery) Review
View larger | ||||
| ||||||||||||||||
|
Ergonomic Design in a Compact Size
The BDF451Z weighs just 4.6 pounds (with battery, sold separately) with a more compact design at 9-3/8 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue. The BDF451Z is also equipped with a built in L.E.D. light that illuminates the work area for more efficient work.
Versatile Design for a Range of Applications
The BDF451Z is perfect for a range of driving and drilling into wood and steel, and can be utilized in many different areas such as HVAC, electrical, plumbing, electrical, remodeling, woodworking, and more. The combination of high-speed and high-torque makes the BDF451Z ideal for any pro contractor who requires a best-in-class engineered cordless driver-drill. The BDF451Z is just another example of Makita's commitment to innovative technology and best in class engineering.
About Makita's 18V LXT Lithium-Ion Cordless Tool SeriesAs one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Optimum Charging System provide several benefits over old battery technology. When compared to traditional 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time.
Makita's 18V Lithium-Ion battery delivers 2,000 cycles--2.5X more than Ni-Cd. In addition, built-in shock absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power. During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also faster: it will charge an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V Compact Lithium-Ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18V LXT and 18V Compact Lithium-Ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing line of LXT cordless tool solutions features a wide range of industrial-quality power tools, including driver-drills, impact drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite radio, rechargeable flashlights, and several different combo kits.
About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
WarrantyEvery Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.
What's in the Box
Makita BDF451Z 18V LXT Lithium-Ion Cordless 1/2-Inch Driver-Drill (tool only).
| ||||||||||||||||||||||||
| ||||||||||||||||||||||||
| ||||||||||||||||||||||||
|